Open From: 7:00AM-5:00PM


Damaged Bathroom? Expert Advice on Fixing it!

If you have some time this weekend, you can save yourself some cash with this loo alternative task and DIY with a touch bit of patience and recognize how.

If a restroom has emerged as damaged or is overly inefficient, then it is time for a brand new model that is water responsible. Toilet substitute can be damaged down into three primary tasks: Removal of the old bathroom, removal, and replacement of the wax ring, and the set up of the brand new restroom. This is the best information when it comes to damaged bathroom remodeling!

There are several kinds and models available to your new restroom, so make certain to properly research the pleasant kind in your wishes. There are fashions which might be all one piece, however maximum likely you will need to buy the base and tank one by one. If the tank does not include all of its operating parts, then you will also want to purchase the flush valve and fill valve kits. You will even need to shop for the wax ring package to seal the bottom to the sewer line. This kit should consist of the mounting bolts however you may also need to buy the finishing caps that cross over the anchor bolts. You may also want to buy a cement mixing bathtub to aid in the removal of the old bathroom. If the water supply valve on the antique bathroom is broken or has rust, you should don’t forget to change it along with the restroom tank hose.

Toilet replacement equipment wanted are an adjustable open stop wrench or socket wrench, huge flat head screwdriver, mini hack saw, disposable plastic scraper, plastic trash luggage, paper towels, latex gloves, and a utility knife or field cutter.

Remove lavatory by way of turning off the water deliver valve and remove the lid to the toilet tank. Flush the bathroom to relieve any water strain and disconnect the water supply valve hose from the fill valve shank.

Remove the plastic mounting bolt caps from the base and unscrew the lock nuts holding it to the ground. You might also need to apply the mini hack saw to eliminate the bolt if the threads are stripped or if the bolt is corroded. Score any caulking around the base of the unit with the software knife, then function the cement mixing bathtub close to the bottom of the bathroom and as soon as the bolts are removed, carry along with your legs to eliminate the toilet unit from the ground and vicinity within the plastic bath.

To cast off the wax ring, placed on latex gloves and have trash bags and paper towels at the equipped. Use the plastic scraper to get rid of the wax from around the ring, wiping it onto the paper towels and throw the wax away. Next, use the scraper to pry up the rubber lip of the wax ring and throw it away. Remove the bolts from the sewer flange and throw those away as well. Clean up any remaining wax with the scraper and paper towels. This must render the hole unfastened from pretty much all wax and any particles.

If there may be going to be a put off in lavatory replacement from vintage to new – you can create a plug for the sewer line hollow by using in part filling a plastic trash bag with some paper towels, wadding it up right into a form of stopper after which plugging the hole. This will preserve the maximum of the gases from the sewer line from coming into the house. Remove the plastic bag stopper before installing the brand new restroom. Be sure to inspect the sewer flange for any harm before bathroom replacement keeps. If there’s any damage, it’s going to need to be repaired first.

Follow the guidelines on the way to install the wax ring. Center and alter the ring as needed into the sewer flange. Now installation the mounting bolts into the courses alongside the edge of the flange and make certain they’re perpendicular. Place the unit over the wax ring and pass the bolts via the mounting holes on each facet of the bottom. You ought to feel the wax ring compress around the toilet’s drain pipe as you push all the way down to seal it.

Take the plastic finishing washers and set up them as directed onto the anchor bolts, nicely tightening the bolt to relaxed the bottom to the floor, making sure the bathroom does no longer move in any respect. You can then trim the bolt to a ¼ inch above the nut with the mini hack noticed, covering them with the finishing caps.

Now you could set up the tank consistent with the instructions and hook up the water tank hose and water supply valve once more. When this is carried out, you can activate the water supply valve and permit the tank to fill with water. Watch for leaks and alter the water level. Install the seat and your restroom substitute is whole!


While replacing a toilet is not an everyday not unusual plumbing project, it’s miles one of these that involve a piece of complexity and takes extra time. But you may do it by way of your self if getting a piece dirty and smelling some horrific gases does not frighten you. Make positive you understand what you are doing; else, it’d be an awesome idea to call a plumber and learn a chunk whilst watching him, in particular, if it’s your first time. In case you’ve got the braveness to go along with this task, then this small DIY manual will help you out.

For simplicity, this article will talk simplest those lavatories that include a separate tank this is installed above the rest room bowl. If you’ve got any commands guide from the manufacturer, this would be the time to go through it thoroughly. And it’s continually higher to have an illustrated diagram of the elements with you.

To start with, turn off the water deliver to the tank and flush it two times to make sure that all the water goes down the drain. To be safe, you could use a sponge to dry any water nevertheless left in the bowl or the tank.

Open the nuts and bolts that connect the tank with the bowl and the water supply line. Upon doing that, it will likely be clean to remove the tank. In case there may be an elbow between the tank and the bowl, you’ll need to take away that first. Then, open the screws which might be used to mount the tank to the partitions. Do this step with more care and preserve the tank tightly in your arms, so that it does not fall while indifferent from the wall.

Now you need to do away with the bowl, that is attached to the ground with some nuts and bolts. These bolts are normally hidden beneath caps, which you could take off by way of inserting a screwdriver below the caps and pushing them in the upward route. The screwdriver have to be included with some tape, or it can scratch the floor of the bowl. Following the elimination of the cap and nuts, the toilet bowl may be at ease in its spot due to a seal with the floor. So rock it back and forth slowly and the seal might subsequently break. Now you can take the bowl wherever you want but it’d be a small weightlifting exercise.

Once the bowl is eliminated from its vicinity, the toilet flange may be within the open. Shove a few antique, abandoned clothes inner so sewer gases would now not escape into your home; This also ensures that removable elements do not come off the flange. Next, get the brand new lavatory and prepare for the installation; you may just want to put everything lower back in its vicinity in the opposite order.

Take out the clothes from the flange and apply a few plumber’s putty to the lowest of the bowl, where it’s going to come into touch with the ground. Now location the bowl such that its outlet might come precisely above the flange. The bolts won’t suit of their vicinity in case you location the bowl wrongly. Once you have put it correctly into its position, ensure that it’s miles in level with the floor. Now positioned the nuts and bolts of their respective positions and tighten them reasonably. Fit the caps onto the bolts, and your new bowl is now in ideal shape. Next, line the tank up with the wall and placed everything else in area in exact opposite order you eliminated it earlier than. Now wash your arms, easy up the mess, and welcome your state-of-the-art rest room!

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post